1956 DKW Munga vs. 1980 Fiat 126

To start off, 1980 Fiat 126 is newer by 24 year(s). Which means there will be less support and parts availability for 1956 DKW Munga. In addition, the cost of maintenance, including insurance, on 1956 DKW Munga would be higher. At 896 cc (3 cylinders), 1956 DKW Munga is equipped with a bigger engine. In terms of performance, 1956 DKW Munga (37 HP @ 4200 RPM) has 13 more horse power than 1980 Fiat 126. (24 HP @ 4500 RPM). In normal driving conditions, 1956 DKW Munga should accelerate faster than 1980 Fiat 126. With that said, vehicle weight also plays an important factor in acceleration. 1956 DKW Munga weights approximately 695 kg more than 1980 Fiat 126. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1956 DKW Munga is four wheel drive (4WD), it will have significant more traction and grip than 1980 Fiat 126. In wet, icy, snow, or gravel driving conditions, 1956 DKW Munga will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 DKW Munga (71 Nm @ 3000 RPM) has 29 more torque (in Nm) than 1980 Fiat 126. (42 Nm @ 3000 RPM). This means 1956 DKW Munga will have an easier job in driving up hills or pulling heavy equipment than 1980 Fiat 126.

Compare all specifications:

1956 DKW Munga 1980 Fiat 126
Make DKW Fiat
Model Munga 126
Year Released 1956 1980
Engine Position Front Rear
Engine Size 896 cc 652 cc
Engine Cylinders 3 cylinders 2 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 37 HP 24 HP
Engine RPM 4200 RPM 4500 RPM
Torque 71 Nm 42 Nm
Torque RPM 3000 RPM 3000 RPM
Fuel Type Gasoline Gasoline
Drive Type 4WD Rear
Vehicle Weight 1280 kg 585 kg
Vehicle Length 3450 mm 3130 mm
Vehicle Width 1820 mm 1390 mm
Vehicle Height 1760 mm 1340 mm
Wheelbase Size 2010 mm 1850 mm