1956 Fiat 1400 vs. 2013 Ford Flex

To start off, 2013 Ford Flex is newer by 57 year(s). Which means there will be less support and parts availability for 1956 Fiat 1400. In addition, the cost of maintenance, including insurance, on 1956 Fiat 1400 would be higher. At 3,500 cc (6 cylinders), 2013 Ford Flex is equipped with a bigger engine. In terms of performance, 2013 Ford Flex (281 HP @ 6500 RPM) has 243 more horse power than 1956 Fiat 1400. (38 HP @ 3200 RPM) In normal driving conditions, 2013 Ford Flex should accelerate faster than 1956 Fiat 1400. With that said, vehicle weight also plays an important factor in acceleration. 2013 Ford Flex weights approximately 843 kg more than 1956 Fiat 1400. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1956 Fiat 1400 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Fiat 1400. However, in wet, icy, snow, or gravel driving conditions, 2013 Ford Flex, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Ford Flex (346 Nm) has 212 more torque (in Nm) than 1956 Fiat 1400. (134 Nm). This means 2013 Ford Flex will have an easier job in driving up hills or pulling heavy equipment than 1956 Fiat 1400. 2013 Ford Flex has automatic transmission and 1956 Fiat 1400 has manual transmission. 1956 Fiat 1400 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Ford Flex will be easier to drive especially in heavy traffic.

Compare all specifications:

1956 Fiat 1400 2013 Ford Flex
Make Fiat Ford
Model 1400 Flex
Year Released 1956 2013
Engine Position Front Front
Engine Size 1900 cc 3500 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 38 HP 281 HP
Engine RPM 3200 RPM 6500 RPM
Torque 134 Nm 346 Nm
Engine Bore Size 82 mm 92 mm
Engine Stroke Size 90 mm 86 mm
Engine Compression Ratio 20.0:1 10.3:1
Fuel Type Diesel Gasoline
Drive Type Rear Front
Transmission Type Manual 6-speed automatic
Number of Seats 5 seats 7 seats
Vehicle Weight 1185 kg 2028 kg
Vehicle Length 4280 mm 5125 mm
Vehicle Width 1660 mm 2256 mm
Vehicle Height 1540 mm 1726 mm
Wheelbase Size 2660 mm 2994 mm