1956 GAZ M-20 vs. 1956 Isuzu Minx

To start off, both 1956 GAZ M-20 and 1956 Isuzu Minx were released in the same year (1956). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 2,120 cc (4 cylinders), 1956 GAZ M-20 is equipped with a bigger engine. In terms of performance, 1956 GAZ M-20 (51 HP @ 3600 RPM) has 6 more horse power than 1956 Isuzu Minx. (45 HP @ 4600 RPM). In normal driving conditions, 1956 GAZ M-20 should accelerate faster than 1956 Isuzu Minx. With that said, vehicle weight also plays an important factor in acceleration. 1956 GAZ M-20 weights approximately 510 kg more than 1956 Isuzu Minx. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 GAZ M-20 (125 Nm @ 2200 RPM) has 34 more torque (in Nm) than 1956 Isuzu Minx. (91 Nm @ 2400 RPM). This means 1956 GAZ M-20 will have an easier job in driving up hills or pulling heavy equipment than 1956 Isuzu Minx.

Compare all specifications:

1956 GAZ M-20 1956 Isuzu Minx
Make GAZ Isuzu
Model M-20 Minx
Year Released 1956 1956
Engine Size 2120 cc 1390 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 51 HP 45 HP
Engine RPM 3600 RPM 4600 RPM
Torque 125 Nm 91 Nm
Torque RPM 2200 RPM 2400 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 1460 kg 950 kg
Vehicle Length 4670 mm 4080 mm
Vehicle Width 1900 mm 1560 mm
Vehicle Height 1650 mm 1520 mm
Wheelbase Size 2710 mm 2440 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]