1956 GAZ M-20 vs. 1978 Toyota Corona
To start off, 1978 Toyota Corona is newer by 22 year(s). Which means there will be less support and parts availability for 1956 GAZ M-20. In addition, the cost of maintenance, including insurance, on 1956 GAZ M-20 would be higher. At 2,120 cc (4 cylinders), 1956 GAZ M-20 is equipped with a bigger engine. In terms of performance, 1978 Toyota Corona (89 HP @ 5000 RPM) has 38 more horse power than 1956 GAZ M-20. (51 HP @ 3600 RPM) In normal driving conditions, 1978 Toyota Corona should accelerate faster than 1956 GAZ M-20. With that said, vehicle weight also plays an important factor in acceleration. 1956 GAZ M-20 weights approximately 340 kg more than 1978 Toyota Corona.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1978 Toyota Corona (145 Nm @ 3600 RPM) has 20 more torque (in Nm) than 1956 GAZ M-20. (125 Nm @ 2200 RPM). This means 1978 Toyota Corona will have an easier job in driving up hills or pulling heavy equipment than 1956 GAZ M-20.
Compare all specifications:
| 1956 GAZ M-20 | 1978 Toyota Corona | |
| Make | GAZ | Toyota |
| Model | M-20 | Corona |
| Year Released | 1956 | 1978 |
| Engine Size | 2120 cc | 1966 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 51 HP | 89 HP |
| Engine RPM | 3600 RPM | 5000 RPM |
| Torque | 125 Nm | 145 Nm |
| Torque RPM | 2200 RPM | 3600 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Vehicle Weight | 1460 kg | 1120 kg |
| Vehicle Length | 4670 mm | 4300 mm |
| Vehicle Width | 1900 mm | 1660 mm |
| Vehicle Height | 1650 mm | 1420 mm |
| Wheelbase Size | 2710 mm | 2530 mm |
