1956 Holden FE vs. 1947 Talbot T 26
To start off, 1956 Holden FE is newer by 9 year(s). Which means there will be less support and parts availability for 1947 Talbot T 26. In addition, the cost of maintenance, including insurance, on 1947 Talbot T 26 would be higher. At 4,481 cc (6 cylinders), 1947 Talbot T 26 is equipped with a bigger engine. In terms of performance, 1947 Talbot T 26 (168 HP @ 4000 RPM) has 108 more horse power than 1956 Holden FE. (60 HP @ 4000 RPM) In normal driving conditions, 1947 Talbot T 26 should accelerate faster than 1956 Holden FE. With that said, vehicle weight also plays an important factor in acceleration. 1947 Talbot T 26 weights approximately 620 kg more than 1956 Holden FE. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 1956 Holden FE | 1947 Talbot T 26 | |
| Make | Holden | Talbot |
| Model | FE | T 26 |
| Year Released | 1956 | 1947 |
| Engine Size | 2166 cc | 4481 cc |
| Engine Cylinders | 6 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 60 HP | 168 HP |
| Engine RPM | 4000 RPM | 4000 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Vehicle Weight | 980 kg | 1600 kg |
| Vehicle Length | 4480 mm | 5060 mm |
| Vehicle Width | 1710 mm | 1770 mm |
| Wheelbase Size | 2670 mm | 3130 mm |
