1956 Holden FE vs. 1980 Mazda Cosmo

To start off, 1980 Mazda Cosmo is newer by 24 year(s). Which means there will be less support and parts availability for 1956 Holden FE. In addition, the cost of maintenance, including insurance, on 1956 Holden FE would be higher. At 2,166 cc (6 cylinders), 1956 Holden FE is equipped with a bigger engine. In terms of performance, 1980 Mazda Cosmo (93 HP @ 5500 RPM) has 33 more horse power than 1956 Holden FE. (60 HP @ 4000 RPM) In normal driving conditions, 1980 Mazda Cosmo should accelerate faster than 1956 Holden FE. With that said, vehicle weight also plays an important factor in acceleration. 1980 Mazda Cosmo weights approximately 110 kg more than 1956 Holden FE. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, both vehicles can yield 151 Nm of torque. So under normal driving conditions, the ability to climb up hills and pull heavy equipment should be relatively similar for both vehicles.

Compare all specifications:

1956 Holden FE 1980 Mazda Cosmo
Make Holden Mazda
Model FE Cosmo
Year Released 1956 1980
Body Type Sedan Coupe
Engine Position Front Front
Engine Size 2166 cc 1769 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 60 HP 93 HP
Engine RPM 4000 RPM 5500 RPM
Torque 151 Nm 151 Nm
Torque RPM 1200 RPM 3300 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 980 kg 1090 kg
Vehicle Length 4480 mm 4480 mm
Vehicle Width 1710 mm 1690 mm
Vehicle Height 1560 mm 1340 mm
Wheelbase Size 2670 mm 2520 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]