1956 Holden FE vs. 1983 Holden Gemini
To start off, 1983 Holden Gemini is newer by 27 year(s). Which means there will be less support and parts availability for 1956 Holden FE. In addition, the cost of maintenance, including insurance, on 1956 Holden FE would be higher. At 2,166 cc (6 cylinders), 1956 Holden FE is equipped with a bigger engine. In terms of performance, 1983 Holden Gemini (66 HP @ 4800 RPM) has 6 more horse power than 1956 Holden FE. (60 HP @ 4000 RPM) In normal driving conditions, 1983 Holden Gemini should accelerate faster than 1956 Holden FE. With that said, vehicle weight also plays an important factor in acceleration. 1956 Holden FE weights approximately 32 kg more than 1983 Holden Gemini.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 Holden FE (151 Nm @ 1200 RPM) has 45 more torque (in Nm) than 1983 Holden Gemini. (106 Nm @ 3600 RPM). This means 1956 Holden FE will have an easier job in driving up hills or pulling heavy equipment than 1983 Holden Gemini.
Compare all specifications:
1956 Holden FE | 1983 Holden Gemini | |
Make | Holden | Holden |
Model | FE | Gemini |
Year Released | 1956 | 1983 |
Engine Position | Front | Front |
Engine Size | 2166 cc | 1584 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 60 HP | 66 HP |
Engine RPM | 4000 RPM | 4800 RPM |
Torque | 151 Nm | 106 Nm |
Torque RPM | 1200 RPM | 3600 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 980 kg | 948 kg |
Vehicle Length | 4480 mm | 4240 mm |
Vehicle Width | 1710 mm | 1580 mm |
Vehicle Height | 1560 mm | 1340 mm |
Wheelbase Size | 2670 mm | 2410 mm |