1956 Holden FE vs. 1983 Lancia Trevi

To start off, 1983 Lancia Trevi is newer by 27 year(s). Which means there will be less support and parts availability for 1956 Holden FE. In addition, the cost of maintenance, including insurance, on 1956 Holden FE would be higher. At 2,166 cc (6 cylinders), 1956 Holden FE is equipped with a bigger engine. In terms of performance, 1983 Lancia Trevi (100 HP @ 5800 RPM) has 40 more horse power than 1956 Holden FE. (60 HP @ 4000 RPM) In normal driving conditions, 1983 Lancia Trevi should accelerate faster than 1956 Holden FE. With that said, vehicle weight also plays an important factor in acceleration. 1983 Lancia Trevi weights approximately 165 kg more than 1956 Holden FE. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1956 Holden FE is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Holden FE. However, in wet, icy, snow, or gravel driving conditions, 1983 Lancia Trevi, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 Holden FE (151 Nm @ 1200 RPM) has 17 more torque (in Nm) than 1983 Lancia Trevi. (134 Nm @ 3000 RPM). This means 1956 Holden FE will have an easier job in driving up hills or pulling heavy equipment than 1983 Lancia Trevi. 1983 Lancia Trevi has automatic transmission and 1956 Holden FE has manual transmission. 1956 Holden FE will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1983 Lancia Trevi will be easier to drive especially in heavy traffic.

Compare all specifications:

1956 Holden FE 1983 Lancia Trevi
Make Holden Lancia
Model FE Trevi
Year Released 1956 1983
Body Type Sedan Sedan
Engine Position Front Front
Engine Size 2166 cc 1585 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 60 HP 100 HP
Engine RPM 4000 RPM 5800 RPM
Torque 151 Nm 134 Nm
Torque RPM 1200 RPM 3000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Vehicle Weight 980 kg 1145 kg
Vehicle Length 4480 mm 4330 mm
Vehicle Width 1710 mm 1720 mm
Vehicle Height 1560 mm 1410 mm
Wheelbase Size 2670 mm 2550 mm