1956 Isuzu Minx vs. 2010 Alfa Romeo Brera
To start off, 2010 Alfa Romeo Brera is newer by 54 year(s). Which means there will be less support and parts availability for 1956 Isuzu Minx. In addition, the cost of maintenance, including insurance, on 1956 Isuzu Minx would be higher. At 2,198 cc (4 cylinders), 2010 Alfa Romeo Brera is equipped with a bigger engine. In terms of performance, 2010 Alfa Romeo Brera (182 HP @ 6500 RPM) has 137 more horse power than 1956 Isuzu Minx. (45 HP @ 4600 RPM) In normal driving conditions, 2010 Alfa Romeo Brera should accelerate faster than 1956 Isuzu Minx. With that said, vehicle weight also plays an important factor in acceleration. 2010 Alfa Romeo Brera weights approximately 595 kg more than 1956 Isuzu Minx. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Isuzu Minx is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Isuzu Minx. However, in wet, icy, snow, or gravel driving conditions, 2010 Alfa Romeo Brera, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Alfa Romeo Brera (230 Nm @ 4500 RPM) has 139 more torque (in Nm) than 1956 Isuzu Minx. (91 Nm @ 2400 RPM). This means 2010 Alfa Romeo Brera will have an easier job in driving up hills or pulling heavy equipment than 1956 Isuzu Minx. 2010 Alfa Romeo Brera has automatic transmission and 1956 Isuzu Minx has manual transmission. 1956 Isuzu Minx will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Alfa Romeo Brera will be easier to drive especially in heavy traffic.
Compare all specifications:
1956 Isuzu Minx | 2010 Alfa Romeo Brera | |
Make | Isuzu | Alfa Romeo |
Model | Minx | Brera |
Year Released | 1956 | 2010 |
Engine Position | Front | Front |
Engine Size | 1390 cc | 2198 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 45 HP | 182 HP |
Engine RPM | 4600 RPM | 6500 RPM |
Torque | 91 Nm | 230 Nm |
Torque RPM | 2400 RPM | 4500 RPM |
Fuel Type | Gasoline | Gasoline - Premium |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 950 kg | 1545 kg |
Vehicle Length | 4080 mm | 4420 mm |
Vehicle Width | 1560 mm | 1840 mm |
Vehicle Height | 1520 mm | 1350 mm |
Wheelbase Size | 2440 mm | 2530 mm |