1956 Lancia Appia vs. 1973 Skoda 110 L
To start off, 1973 Skoda 110 L is newer by 17 year(s). Which means there will be less support and parts availability for 1956 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1956 Lancia Appia would be higher. At 1,090 cc (4 cylinders), 1956 Lancia Appia is equipped with a bigger engine. In terms of performance, both vehicles can yield 43 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1956 Lancia Appia weights approximately 55 kg more than 1973 Skoda 110 L.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 Lancia Appia (78 Nm @ 3000 RPM) has 9 more torque (in Nm) than 1973 Skoda 110 L. (69 Nm @ 3000 RPM). This means 1956 Lancia Appia will have an easier job in driving up hills or pulling heavy equipment than 1973 Skoda 110 L.
Compare all specifications:
1956 Lancia Appia | 1973 Skoda 110 L | |
Make | Lancia | Skoda |
Model | Appia | 110 L |
Year Released | 1956 | 1973 |
Engine Position | Front | Rear |
Engine Size | 1090 cc | 988 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 43 HP | 43 HP |
Engine RPM | 4800 RPM | 4750 RPM |
Torque | 78 Nm | 69 Nm |
Torque RPM | 3000 RPM | 3000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 860 kg | 805 kg |
Vehicle Length | 3980 mm | 4170 mm |
Vehicle Width | 1430 mm | 1630 mm |
Vehicle Height | 1410 mm | 1390 mm |
Wheelbase Size | 2520 mm | 2410 mm |