1956 Lancia Appia vs. 2005 Chrysler PT Cruiser
To start off, 2005 Chrysler PT Cruiser is newer by 49 year(s). Which means there will be less support and parts availability for 1956 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1956 Lancia Appia would be higher. At 1,996 cc (4 cylinders), 2005 Chrysler PT Cruiser is equipped with a bigger engine. In terms of performance, 2005 Chrysler PT Cruiser (139 HP @ 5900 RPM) has 96 more horse power than 1956 Lancia Appia. (43 HP @ 4800 RPM) In normal driving conditions, 2005 Chrysler PT Cruiser should accelerate faster than 1956 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2005 Chrysler PT Cruiser weights approximately 564 kg more than 1956 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Lancia Appia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Lancia Appia. However, in wet, icy, snow, or gravel driving conditions, 2005 Chrysler PT Cruiser, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Chrysler PT Cruiser (189 Nm @ 4150 RPM) has 111 more torque (in Nm) than 1956 Lancia Appia. (78 Nm @ 3000 RPM). This means 2005 Chrysler PT Cruiser will have an easier job in driving up hills or pulling heavy equipment than 1956 Lancia Appia. 2005 Chrysler PT Cruiser has automatic transmission and 1956 Lancia Appia has manual transmission. 1956 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Chrysler PT Cruiser will be easier to drive especially in heavy traffic.
Compare all specifications:
1956 Lancia Appia | 2005 Chrysler PT Cruiser | |
Make | Lancia | Chrysler |
Model | Appia | PT Cruiser |
Year Released | 1956 | 2005 |
Engine Position | Front | Front |
Engine Size | 1090 cc | 1996 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 43 HP | 139 HP |
Engine RPM | 4800 RPM | 5900 RPM |
Torque | 78 Nm | 189 Nm |
Torque RPM | 3000 RPM | 4150 RPM |
Fuel Type | Gasoline | Gasoline - Premium |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 860 kg | 1424 kg |
Vehicle Length | 3980 mm | 4290 mm |
Vehicle Width | 1430 mm | 1710 mm |
Vehicle Height | 1410 mm | 1610 mm |
Wheelbase Size | 2520 mm | 2620 mm |