1956 Lancia Appia vs. 2005 Mercedes-Benz C
To start off, 2005 Mercedes-Benz C is newer by 49 year(s). Which means there will be less support and parts availability for 1956 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1956 Lancia Appia would be higher. At 3,498 cc (6 cylinders), 2005 Mercedes-Benz C is equipped with a bigger engine. In terms of performance, 2005 Mercedes-Benz C (256 HP @ 6000 RPM) has 213 more horse power than 1956 Lancia Appia. (43 HP @ 4800 RPM) In normal driving conditions, 2005 Mercedes-Benz C should accelerate faster than 1956 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2005 Mercedes-Benz C weights approximately 740 kg more than 1956 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Mercedes-Benz C (346 Nm @ 2500 RPM) has 268 more torque (in Nm) than 1956 Lancia Appia. (78 Nm @ 3000 RPM). This means 2005 Mercedes-Benz C will have an easier job in driving up hills or pulling heavy equipment than 1956 Lancia Appia. 2005 Mercedes-Benz C has automatic transmission and 1956 Lancia Appia has manual transmission. 1956 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Mercedes-Benz C will be easier to drive especially in heavy traffic.
Compare all specifications:
1956 Lancia Appia | 2005 Mercedes-Benz C | |
Make | Lancia | Mercedes-Benz |
Model | Appia | C |
Year Released | 1956 | 2005 |
Engine Position | Front | Front |
Engine Size | 1090 cc | 3498 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 43 HP | 256 HP |
Engine RPM | 4800 RPM | 6000 RPM |
Torque | 78 Nm | 346 Nm |
Torque RPM | 3000 RPM | 2500 RPM |
Drive Type | Rear | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 860 kg | 1600 kg |
Vehicle Length | 3980 mm | 4550 mm |
Vehicle Width | 1430 mm | 1730 mm |
Vehicle Height | 1410 mm | 1470 mm |
Wheelbase Size | 2520 mm | 2890 mm |