1956 Lancia Appia vs. 2012 Mercedes-Benz A
To start off, 2012 Mercedes-Benz A is newer by 56 year(s). Which means there will be less support and parts availability for 1956 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1956 Lancia Appia would be higher. At 2,034 cc (4 cylinders), 2012 Mercedes-Benz A is equipped with a bigger engine. In terms of performance, 2012 Mercedes-Benz A (134 HP @ 5750 RPM) has 91 more horse power than 1956 Lancia Appia. (43 HP @ 4800 RPM) In normal driving conditions, 2012 Mercedes-Benz A should accelerate faster than 1956 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2012 Mercedes-Benz A weights approximately 365 kg more than 1956 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Lancia Appia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Lancia Appia. However, in wet, icy, snow, or gravel driving conditions, 2012 Mercedes-Benz A, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Mercedes-Benz A (185 Nm @ 3500 RPM) has 107 more torque (in Nm) than 1956 Lancia Appia. (78 Nm @ 3000 RPM). This means 2012 Mercedes-Benz A will have an easier job in driving up hills or pulling heavy equipment than 1956 Lancia Appia. 2012 Mercedes-Benz A has automatic transmission and 1956 Lancia Appia has manual transmission. 1956 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Mercedes-Benz A will be easier to drive especially in heavy traffic.
Compare all specifications:
1956 Lancia Appia | 2012 Mercedes-Benz A | |
Make | Lancia | Mercedes-Benz |
Model | Appia | A |
Year Released | 1956 | 2012 |
Engine Position | Front | Front |
Engine Size | 1090 cc | 2034 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 43 HP | 134 HP |
Engine RPM | 4800 RPM | 5750 RPM |
Torque | 78 Nm | 185 Nm |
Torque RPM | 3000 RPM | 3500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 860 kg | 1225 kg |
Vehicle Length | 3980 mm | 3840 mm |
Vehicle Width | 1430 mm | 1770 mm |
Vehicle Height | 1410 mm | 1600 mm |
Wheelbase Size | 2520 mm | 2570 mm |