1956 Lancia Flaminia vs. 2008 Mazda Etude
To start off, 2008 Mazda Etude is newer by 52 year(s). Which means there will be less support and parts availability for 1956 Lancia Flaminia. In addition, the cost of maintenance, including insurance, on 1956 Lancia Flaminia would be higher. At 2,458 cc (6 cylinders), 1956 Lancia Flaminia is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1956 Lancia Flaminia weights approximately 117 kg more than 2008 Mazda Etude.
Because 1956 Lancia Flaminia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Lancia Flaminia. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda Etude, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 Lancia Flaminia (186 Nm @ 3500 RPM) has 23 more torque (in Nm) than 2008 Mazda Etude. (163 Nm @ 4000 RPM). This means 1956 Lancia Flaminia will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda Etude.
Compare all specifications:
| 1956 Lancia Flaminia | 2008 Mazda Etude | |
| Make | Lancia | Mazda |
| Model | Flaminia | Etude |
| Year Released | 1956 | 2008 |
| Engine Position | Front | Front |
| Engine Size | 2458 cc | 1839 cc |
| Horse Power | 119 HP | 0 HP |
| Torque | 186 Nm | 163 Nm |
| Torque RPM | 3500 RPM | 4000 RPM |
| Engine Bore Size | 80 mm | 83 mm |
| Engine Stroke Size | 81.5 mm | 85 mm |
| Engine Compression Ratio | 9.0:1 | 9.6:1 |
| Top Speed | 171 km/hour | 194 km/hour |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Manual |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1210 kg | 1093 kg |
| Wheelbase Size | 2780 mm | 2620 mm |
