1956 Lancia Flaminia vs. 2008 Mazda Rustler
To start off, 2008 Mazda Rustler is newer by 52 year(s). Which means there will be less support and parts availability for 1956 Lancia Flaminia. In addition, the cost of maintenance, including insurance, on 1956 Lancia Flaminia would be higher. At 2,458 cc (6 cylinders), 1956 Lancia Flaminia is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1956 Lancia Flaminia weights approximately 196 kg more than 2008 Mazda Rustler.
Because 1956 Lancia Flaminia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Lancia Flaminia. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda Rustler, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 Lancia Flaminia (186 Nm @ 3500 RPM) has 66 more torque (in Nm) than 2008 Mazda Rustler. (120 Nm @ 3800 RPM). This means 1956 Lancia Flaminia will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda Rustler.
Compare all specifications:
| 1956 Lancia Flaminia | 2008 Mazda Rustler | |
| Make | Lancia | Mazda |
| Model | Flaminia | Rustler |
| Year Released | 1956 | 2008 |
| Engine Size | 2458 cc | 1586 cc |
| Horse Power | 119 HP | 0 HP |
| Torque | 186 Nm | 120 Nm |
| Torque RPM | 3500 RPM | 3800 RPM |
| Engine Bore Size | 80 mm | 81 mm |
| Engine Stroke Size | 81.5 mm | 77 mm |
| Engine Compression Ratio | 9.0:1 | 9.8:1 |
| Top Speed | 171 km/hour | 165 km/hour |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Manual |
| Number of Seats | 4 seats | 3 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 1210 kg | 1014 kg |
| Wheelbase Size | 2780 mm | 2570 mm |
