1956 Lancia Flaminia vs. 2010 Citroen C3
To start off, 2010 Citroen C3 is newer by 54 year(s). Which means there will be less support and parts availability for 1956 Lancia Flaminia. In addition, the cost of maintenance, including insurance, on 1956 Lancia Flaminia would be higher. At 2,458 cc (6 cylinders), 1956 Lancia Flaminia is equipped with a bigger engine. In terms of performance, 1956 Lancia Flaminia (119 HP @ 5100 RPM) has 52 more horse power than 2010 Citroen C3. (67 HP @ 4000 RPM). In normal driving conditions, 1956 Lancia Flaminia should accelerate faster than 2010 Citroen C3. With that said, vehicle weight also plays an important factor in acceleration. 1956 Lancia Flaminia weights approximately 87 kg more than 2010 Citroen C3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Lancia Flaminia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Lancia Flaminia. However, in wet, icy, snow, or gravel driving conditions, 2010 Citroen C3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 Lancia Flaminia (186 Nm @ 3500 RPM) has 25 more torque (in Nm) than 2010 Citroen C3. (161 Nm @ 2000 RPM). This means 1956 Lancia Flaminia will have an easier job in driving up hills or pulling heavy equipment than 2010 Citroen C3. 2010 Citroen C3 has automatic transmission and 1956 Lancia Flaminia has manual transmission. 1956 Lancia Flaminia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Citroen C3 will be easier to drive especially in heavy traffic.
Compare all specifications:
1956 Lancia Flaminia | 2010 Citroen C3 | |
Make | Lancia | Citroen |
Model | Flaminia | C3 |
Year Released | 1956 | 2010 |
Engine Position | Front | Front |
Engine Size | 2458 cc | 1398 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 119 HP | 67 HP |
Engine RPM | 5100 RPM | 4000 RPM |
Torque | 186 Nm | 161 Nm |
Torque RPM | 3500 RPM | 2000 RPM |
Engine Bore Size | 80 mm | 73.7 mm |
Engine Stroke Size | 81.5 mm | 82 mm |
Top Speed | 171 km/hour | 165 km/hour |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1210 kg | 1123 kg |
Vehicle Length | 4690 mm | 3870 mm |
Vehicle Width | 1750 mm | 1670 mm |
Vehicle Height | 1430 mm | 1520 mm |
Wheelbase Size | 2780 mm | 2470 mm |