1956 Lancia Flaminia vs. 2010 Fiat Ulysse
To start off, 2010 Fiat Ulysse is newer by 54 year(s). Which means there will be less support and parts availability for 1956 Lancia Flaminia. In addition, the cost of maintenance, including insurance, on 1956 Lancia Flaminia would be higher. At 2,458 cc (6 cylinders), 1956 Lancia Flaminia is equipped with a bigger engine. In terms of performance, 2010 Fiat Ulysse (134 HP @ 6000 RPM) has 15 more horse power than 1956 Lancia Flaminia. (119 HP @ 5100 RPM) In normal driving conditions, 2010 Fiat Ulysse should accelerate faster than 1956 Lancia Flaminia. With that said, vehicle weight also plays an important factor in acceleration. 2010 Fiat Ulysse weights approximately 440 kg more than 1956 Lancia Flaminia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Lancia Flaminia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Lancia Flaminia. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Ulysse, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Fiat Ulysse (190 Nm @ 4100 RPM) has 4 more torque (in Nm) than 1956 Lancia Flaminia. (186 Nm @ 3500 RPM). This means 2010 Fiat Ulysse will have an easier job in driving up hills or pulling heavy equipment than 1956 Lancia Flaminia. 2010 Fiat Ulysse has automatic transmission and 1956 Lancia Flaminia has manual transmission. 1956 Lancia Flaminia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Fiat Ulysse will be easier to drive especially in heavy traffic.
Compare all specifications:
1956 Lancia Flaminia | 2010 Fiat Ulysse | |
Make | Lancia | Fiat |
Model | Flaminia | Ulysse |
Year Released | 1956 | 2010 |
Engine Position | Front | Front |
Engine Size | 2458 cc | 1997 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 119 HP | 134 HP |
Engine RPM | 5100 RPM | 6000 RPM |
Torque | 186 Nm | 190 Nm |
Torque RPM | 3500 RPM | 4100 RPM |
Engine Bore Size | 80 mm | 85 mm |
Engine Stroke Size | 81.5 mm | 88 mm |
Engine Compression Ratio | 9.0:1 | 11.0:1 |
Top Speed | 171 km/hour | 185 km/hour |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1210 kg | 1650 kg |
Vehicle Length | 4690 mm | 4730 mm |
Vehicle Width | 1750 mm | 1870 mm |
Vehicle Height | 1430 mm | 1760 mm |
Wheelbase Size | 2780 mm | 2830 mm |