1956 Lancia Flaminia vs. 2010 Nissan Maxima
To start off, 2010 Nissan Maxima is newer by 54 year(s). Which means there will be less support and parts availability for 1956 Lancia Flaminia. In addition, the cost of maintenance, including insurance, on 1956 Lancia Flaminia would be higher. At 3,500 cc (6 cylinders), 2010 Nissan Maxima is equipped with a bigger engine. In terms of performance, 2010 Nissan Maxima (291 HP @ 6400 RPM) has 172 more horse power than 1956 Lancia Flaminia. (119 HP @ 5100 RPM) In normal driving conditions, 2010 Nissan Maxima should accelerate faster than 1956 Lancia Flaminia. With that said, vehicle weight also plays an important factor in acceleration. 2010 Nissan Maxima weights approximately 407 kg more than 1956 Lancia Flaminia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Lancia Flaminia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Lancia Flaminia. However, in wet, icy, snow, or gravel driving conditions, 2010 Nissan Maxima, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Nissan Maxima (354 Nm @ 4400 RPM) has 168 more torque (in Nm) than 1956 Lancia Flaminia. (186 Nm @ 3500 RPM). This means 2010 Nissan Maxima will have an easier job in driving up hills or pulling heavy equipment than 1956 Lancia Flaminia. 2010 Nissan Maxima has automatic transmission and 1956 Lancia Flaminia has manual transmission. 1956 Lancia Flaminia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Nissan Maxima will be easier to drive especially in heavy traffic.
Compare all specifications:
1956 Lancia Flaminia | 2010 Nissan Maxima | |
Make | Lancia | Nissan |
Model | Flaminia | Maxima |
Year Released | 1956 | 2010 |
Engine Position | Front | Front |
Engine Size | 2458 cc | 3500 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | V | V |
Horse Power | 119 HP | 291 HP |
Engine RPM | 5100 RPM | 6400 RPM |
Torque | 186 Nm | 354 Nm |
Torque RPM | 3500 RPM | 4400 RPM |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1210 kg | 1617 kg |
Vehicle Length | 4690 mm | 4841 mm |
Vehicle Width | 1750 mm | 1859 mm |
Vehicle Height | 1430 mm | 1468 mm |
Wheelbase Size | 2780 mm | 2776 mm |