1956 Mercedes-Benz 300 vs. 2000 Honda Capa

To start off, 2000 Honda Capa is newer by 44 year(s). Which means there will be less support and parts availability for 1956 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1956 Mercedes-Benz 300 would be higher. At 2,995 cc (6 cylinders), 1956 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 1956 Mercedes-Benz 300 (238 HP @ 5800 RPM) has 141 more horse power than 2000 Honda Capa. (97 HP @ 6300 RPM). In normal driving conditions, 1956 Mercedes-Benz 300 should accelerate faster than 2000 Honda Capa. With that said, vehicle weight also plays an important factor in acceleration. 1956 Mercedes-Benz 300 weights approximately 305 kg more than 2000 Honda Capa. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1956 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 2000 Honda Capa, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 Mercedes-Benz 300 (271 Nm @ 4600 RPM) has 135 more torque (in Nm) than 2000 Honda Capa. (136 Nm @ 3500 RPM). This means 1956 Mercedes-Benz 300 will have an easier job in driving up hills or pulling heavy equipment than 2000 Honda Capa. 2000 Honda Capa has automatic transmission and 1956 Mercedes-Benz 300 has manual transmission. 1956 Mercedes-Benz 300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Honda Capa will be easier to drive especially in heavy traffic.

Compare all specifications:

1956 Mercedes-Benz 300 2000 Honda Capa
Make Mercedes-Benz Honda
Model 300 Capa
Year Released 1956 2000
Engine Position Front Front
Engine Size 2995 cc 1493 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 238 HP 97 HP
Engine RPM 5800 RPM 6300 RPM
Torque 271 Nm 136 Nm
Torque RPM 4600 RPM 3500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 2 seats 4 seats
Vehicle Weight 1385 kg 1080 kg
Vehicle Length 4580 mm 3780 mm
Vehicle Width 1800 mm 1650 mm
Vehicle Height 1310 mm 1660 mm
Wheelbase Size 2410 mm 2370 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]