1956 Mercedes-Benz 300 vs. 2010 Ford Flex
To start off, 2010 Ford Flex is newer by 54 year(s). Which means there will be less support and parts availability for 1956 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1956 Mercedes-Benz 300 would be higher. At 3,500 cc (6 cylinders), 2010 Ford Flex is equipped with a bigger engine. In terms of performance, 2010 Ford Flex (262 HP @ 6250 RPM) has 24 more horse power than 1956 Mercedes-Benz 300. (238 HP @ 5800 RPM) In normal driving conditions, 2010 Ford Flex should accelerate faster than 1956 Mercedes-Benz 300. With that said, vehicle weight also plays an important factor in acceleration. 2010 Ford Flex weights approximately 643 kg more than 1956 Mercedes-Benz 300. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 2010 Ford Flex, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Ford Flex (336 Nm @ 4500 RPM) has 65 more torque (in Nm) than 1956 Mercedes-Benz 300. (271 Nm @ 4600 RPM). This means 2010 Ford Flex will have an easier job in driving up hills or pulling heavy equipment than 1956 Mercedes-Benz 300. 2010 Ford Flex has automatic transmission and 1956 Mercedes-Benz 300 has manual transmission. 1956 Mercedes-Benz 300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Ford Flex will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1956 Mercedes-Benz 300 | 2010 Ford Flex | |
| Make | Mercedes-Benz | Ford |
| Model | 300 | Flex |
| Year Released | 1956 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 2995 cc | 3500 cc |
| Engine Cylinders | 6 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 238 HP | 262 HP |
| Engine RPM | 5800 RPM | 6250 RPM |
| Torque | 271 Nm | 336 Nm |
| Torque RPM | 4600 RPM | 4500 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 2 seats | 7 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 1385 kg | 2028 kg |
| Vehicle Length | 4580 mm | 5126 mm |
| Vehicle Width | 1800 mm | 1928 mm |
| Vehicle Height | 1310 mm | 1727 mm |
| Wheelbase Size | 2410 mm | 2995 mm |
| Fuel Tank Capacity | 100 L | 70 L |
