1956 Mercedes-Benz 300 vs. 2010 Mazda 3
To start off, 2010 Mazda 3 is newer by 54 year(s). Which means there will be less support and parts availability for 1956 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1956 Mercedes-Benz 300 would be higher. At 2,995 cc (6 cylinders), 1956 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 1956 Mercedes-Benz 300 (238 HP @ 5800 RPM) has 90 more horse power than 2010 Mazda 3. (148 HP @ 6500 RPM). In normal driving conditions, 1956 Mercedes-Benz 300 should accelerate faster than 2010 Mazda 3. With that said, vehicle weight also plays an important factor in acceleration. 1956 Mercedes-Benz 300 weights approximately 85 kg more than 2010 Mazda 3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 2010 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 Mercedes-Benz 300 (271 Nm @ 4600 RPM) has 88 more torque (in Nm) than 2010 Mazda 3. (183 Nm @ 4500 RPM). This means 1956 Mercedes-Benz 300 will have an easier job in driving up hills or pulling heavy equipment than 2010 Mazda 3. 2010 Mazda 3 has automatic transmission and 1956 Mercedes-Benz 300 has manual transmission. 1956 Mercedes-Benz 300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Mazda 3 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1956 Mercedes-Benz 300 | 2010 Mazda 3 | |
| Make | Mercedes-Benz | Mazda |
| Model | 300 | 3 |
| Year Released | 1956 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 2995 cc | 2000 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 238 HP | 148 HP |
| Engine RPM | 5800 RPM | 6500 RPM |
| Torque | 271 Nm | 183 Nm |
| Torque RPM | 4600 RPM | 4500 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | 5-speed automatic |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 1385 kg | 1300 kg |
| Vehicle Length | 4580 mm | 4590 mm |
| Vehicle Width | 1800 mm | 1755 mm |
| Vehicle Height | 1310 mm | 1471 mm |
| Wheelbase Size | 2410 mm | 2639 mm |
| Fuel Tank Capacity | 100 L | 55 L |
