1956 Mercedes-Benz 300 vs. 2011 Mazda 3

To start off, 2011 Mazda 3 is newer by 55 year(s). Which means there will be less support and parts availability for 1956 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1956 Mercedes-Benz 300 would be higher. At 2,995 cc (6 cylinders), 1956 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 1956 Mercedes-Benz 300 (238 HP @ 5800 RPM) has 90 more horse power than 2011 Mazda 3. (148 HP @ 6500 RPM). In normal driving conditions, 1956 Mercedes-Benz 300 should accelerate faster than 2011 Mazda 3. With that said, vehicle weight also plays an important factor in acceleration. 1956 Mercedes-Benz 300 weights approximately 85 kg more than 2011 Mazda 3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1956 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 2011 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 Mercedes-Benz 300 (271 Nm @ 4600 RPM) has 88 more torque (in Nm) than 2011 Mazda 3. (183 Nm @ 4500 RPM). This means 1956 Mercedes-Benz 300 will have an easier job in driving up hills or pulling heavy equipment than 2011 Mazda 3. 2011 Mazda 3 has automatic transmission and 1956 Mercedes-Benz 300 has manual transmission. 1956 Mercedes-Benz 300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2011 Mazda 3 will be easier to drive especially in heavy traffic.

Compare all specifications:

1956 Mercedes-Benz 300 2011 Mazda 3
Make Mercedes-Benz Mazda
Model 300 3
Year Released 1956 2011
Engine Position Front Front
Engine Size 2995 cc 2000 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 238 HP 148 HP
Engine RPM 5800 RPM 6500 RPM
Torque 271 Nm 183 Nm
Torque RPM 4600 RPM 4500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual 5-speed automatic
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1385 kg 1300 kg
Vehicle Length 4580 mm 4590 mm
Vehicle Width 1800 mm 1755 mm
Vehicle Height 1310 mm 1471 mm
Wheelbase Size 2410 mm 2639 mm
Fuel Tank Capacity 100 L 55 L