1956 Mercedes-Benz 300 vs. 2012 Mazda 3

To start off, 2012 Mazda 3 is newer by 56 year(s). Which means there will be less support and parts availability for 1956 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1956 Mercedes-Benz 300 would be higher. At 2,996 cc (6 cylinders), 1956 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 1956 Mercedes-Benz 300 (172 HP @ 5400 RPM) has 5 more horse power than 2012 Mazda 3. (167 HP @ 6000 RPM). In normal driving conditions, 1956 Mercedes-Benz 300 should accelerate faster than 2012 Mazda 3. With that said, vehicle weight also plays an important factor in acceleration. 1956 Mercedes-Benz 300 weights approximately 397 kg more than 2012 Mazda 3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1956 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 2012 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 Mercedes-Benz 300 (255 Nm @ 4300 RPM) has 27 more torque (in Nm) than 2012 Mazda 3. (228 Nm @ 4000 RPM). This means 1956 Mercedes-Benz 300 will have an easier job in driving up hills or pulling heavy equipment than 2012 Mazda 3. 2012 Mazda 3 has automatic transmission and 1956 Mercedes-Benz 300 has manual transmission. 1956 Mercedes-Benz 300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Mazda 3 will be easier to drive especially in heavy traffic.

Compare all specifications:

1956 Mercedes-Benz 300 2012 Mazda 3
Make Mercedes-Benz Mazda
Model 300 3
Year Released 1956 2012
Engine Position Front Front
Engine Size 2996 cc 2500 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 172 HP 167 HP
Engine RPM 5400 RPM 6000 RPM
Torque 255 Nm 228 Nm
Torque RPM 4300 RPM 4000 RPM
Drive Type Rear Front
Transmission Type Manual 5-speed automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 1780 kg 1383 kg
Vehicle Length 4710 mm 4506 mm
Vehicle Width 1920 mm 1755 mm
Vehicle Height 1520 mm 1471 mm
Wheelbase Size 2910 mm 2639 mm
Fuel Tank Capacity 85 L 60 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]