1956 Mercedes-Benz 300 vs. 2012 Mazda CX-7

To start off, 2012 Mazda CX-7 is newer by 56 year(s). Which means there will be less support and parts availability for 1956 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1956 Mercedes-Benz 300 would be higher. At 2,995 cc (6 cylinders), 1956 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 2012 Mazda CX-7 (244 HP @ 5000 RPM) has 6 more horse power than 1956 Mercedes-Benz 300. (238 HP @ 5800 RPM) In normal driving conditions, 2012 Mazda CX-7 should accelerate faster than 1956 Mercedes-Benz 300. With that said, vehicle weight also plays an important factor in acceleration. 2012 Mazda CX-7 weights approximately 333 kg more than 1956 Mercedes-Benz 300. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1956 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 2012 Mazda CX-7, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Mazda CX-7 (349 Nm @ 2500 RPM) has 78 more torque (in Nm) than 1956 Mercedes-Benz 300. (271 Nm @ 4600 RPM). This means 2012 Mazda CX-7 will have an easier job in driving up hills or pulling heavy equipment than 1956 Mercedes-Benz 300. 2012 Mazda CX-7 has automatic transmission and 1956 Mercedes-Benz 300 has manual transmission. 1956 Mercedes-Benz 300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Mazda CX-7 will be easier to drive especially in heavy traffic.

Compare all specifications:

1956 Mercedes-Benz 300 2012 Mazda CX-7
Make Mercedes-Benz Mazda
Model 300 CX-7
Year Released 1956 2012
Engine Position Front Front
Engine Size 2995 cc 2300 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 238 HP 244 HP
Engine RPM 5800 RPM 5000 RPM
Torque 271 Nm 349 Nm
Torque RPM 4600 RPM 2500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 1385 kg 1718 kg
Vehicle Length 4580 mm 4681 mm
Vehicle Width 1800 mm 1872 mm
Vehicle Height 1310 mm 1646 mm
Wheelbase Size 2410 mm 2751 mm
Fuel Tank Capacity 100 L 69 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]