1957 Abarth 500 vs. 1989 Ford Falcon

To start off, 1989 Ford Falcon is newer by 32 year(s). Which means there will be less support and parts availability for 1957 Abarth 500. In addition, the cost of maintenance, including insurance, on 1957 Abarth 500 would be higher. At 3,157 cc (6 cylinders), 1989 Ford Falcon is equipped with a bigger engine. In terms of performance, 1989 Ford Falcon (120 HP) has 100 more horse power than 1957 Abarth 500. (20 HP) In normal driving conditions, 1989 Ford Falcon should accelerate faster than 1957 Abarth 500. With that said, vehicle weight also plays an important factor in acceleration. 1989 Ford Falcon weights approximately 975 kg more than 1957 Abarth 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1989 Ford Falcon (236 Nm @ 3250 RPM) has 204 more torque (in Nm) than 1957 Abarth 500. (32 Nm @ 3000 RPM). This means 1989 Ford Falcon will have an easier job in driving up hills or pulling heavy equipment than 1957 Abarth 500.

Compare all specifications:

1957 Abarth 500 1989 Ford Falcon
Make Abarth Ford
Model 500 Falcon
Year Released 1957 1989
Engine Position Rear Front
Engine Size 478 cc 3157 cc
Engine Cylinders 2 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 20 HP 120 HP
Torque 32 Nm 236 Nm
Torque RPM 3000 RPM 3250 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 2 seats 5 seats
Vehicle Weight 445 kg 1420 kg
Vehicle Length 2980 mm 4820 mm
Vehicle Width 1330 mm 1860 mm
Vehicle Height 1330 mm 1410 mm
Wheelbase Size 1850 mm 2800 mm