1957 Abarth 500 vs. 2008 Ford Mustang

To start off, 2008 Ford Mustang is newer by 51 year(s). Which means there will be less support and parts availability for 1957 Abarth 500. In addition, the cost of maintenance, including insurance, on 1957 Abarth 500 would be higher. At 4,606 cc (8 cylinders), 2008 Ford Mustang is equipped with a bigger engine. In terms of performance, 2008 Ford Mustang (300 HP) has 280 more horse power than 1957 Abarth 500. (20 HP) In normal driving conditions, 2008 Ford Mustang should accelerate faster than 1957 Abarth 500. With that said, vehicle weight also plays an important factor in acceleration. 2008 Ford Mustang weights approximately 665 kg more than 1957 Abarth 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Ford Mustang (434 Nm @ 4500 RPM) has 402 more torque (in Nm) than 1957 Abarth 500. (32 Nm @ 3000 RPM). This means 2008 Ford Mustang will have an easier job in driving up hills or pulling heavy equipment than 1957 Abarth 500.

Compare all specifications:

1957 Abarth 500 2008 Ford Mustang
Make Abarth Ford
Model 500 Mustang
Year Released 1957 2008
Engine Position Rear Front
Engine Size 478 cc 4606 cc
Engine Cylinders 2 cylinders 8 cylinders
Engine Type in-line V
Horse Power 20 HP 300 HP
Torque 32 Nm 434 Nm
Torque RPM 3000 RPM 4500 RPM
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 2 seats 4 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 445 kg 1110 kg
Vehicle Length 2980 mm 4770 mm
Vehicle Width 1330 mm 1890 mm
Vehicle Height 1330 mm 1390 mm
Wheelbase Size 1850 mm 2730 mm
Fuel Tank Capacity 27 L 61 L