1957 Abarth 500 vs. 2008 Rover 75
To start off, 2008 Rover 75 is newer by 51 year(s). Which means there will be less support and parts availability for 1957 Abarth 500. In addition, the cost of maintenance, including insurance, on 1957 Abarth 500 would be higher. At 2,497 cc, 2008 Rover 75 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Rover 75 weights approximately 1067 kg more than 1957 Abarth 500.
Because 1957 Abarth 500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1957 Abarth 500. However, in wet, icy, snow, or gravel driving conditions, 2008 Rover 75, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Rover 75 (240 Nm @ 4000 RPM) has 207 more torque (in Nm) than 1957 Abarth 500. (33 Nm @ 3800 RPM). This means 2008 Rover 75 will have an easier job in driving up hills or pulling heavy equipment than 1957 Abarth 500.
Compare all specifications:
1957 Abarth 500 | 2008 Rover 75 | |
Make | Abarth | Rover |
Model | 500 | 75 |
Year Released | 1957 | 2008 |
Engine Size | 479 cc | 2497 cc |
Horse Power | 23 HP | 0 HP |
Torque | 33 Nm | 240 Nm |
Torque RPM | 3800 RPM | 4000 RPM |
Engine Bore Size | 66 mm | 80 mm |
Engine Stroke Size | 70 mm | 82.8 mm |
Engine Compression Ratio | 9.7:1 | 10.5:1 |
Fuel Type | Gasoline | Gasoline |
Top Speed | 145 km/hour | 220 km/hour |
Drive Type | Rear | Front |
Transmission Type | Manual | Manual |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 468 kg | 1535 kg |
Vehicle Length | 3350 mm | 4000 mm |
Vehicle Height | 1220 mm | 1420 mm |
Wheelbase Size | 1850 mm | 2750 mm |
Fuel Tank Capacity | 27 L | 65 L |