1957 Abarth 500 vs. 2010 Pontiac G3
To start off, 2010 Pontiac G3 is newer by 53 year(s). Which means there will be less support and parts availability for 1957 Abarth 500. In addition, the cost of maintenance, including insurance, on 1957 Abarth 500 would be higher. At 1,599 cc (4 cylinders), 2010 Pontiac G3 is equipped with a bigger engine. In terms of performance, 2010 Pontiac G3 (105 HP) has 85 more horse power than 1957 Abarth 500. (20 HP) In normal driving conditions, 2010 Pontiac G3 should accelerate faster than 1957 Abarth 500.
Because 1957 Abarth 500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1957 Abarth 500. However, in wet, icy, snow, or gravel driving conditions, 2010 Pontiac G3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Pontiac G3 (142 Nm @ 3800 RPM) has 110 more torque (in Nm) than 1957 Abarth 500. (32 Nm @ 3000 RPM). This means 2010 Pontiac G3 will have an easier job in driving up hills or pulling heavy equipment than 1957 Abarth 500.
Compare all specifications:
1957 Abarth 500 | 2010 Pontiac G3 | |
Make | Abarth | Pontiac |
Model | 500 | G3 |
Year Released | 1957 | 2010 |
Engine Position | Rear | Front |
Engine Size | 478 cc | 1599 cc |
Engine Cylinders | 2 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 20 HP | 105 HP |
Torque | 32 Nm | 142 Nm |
Torque RPM | 3000 RPM | 3800 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Manual |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Length | 2980 mm | 3940 mm |
Vehicle Width | 1330 mm | 1690 mm |
Vehicle Height | 1330 mm | 1510 mm |
Wheelbase Size | 1850 mm | 2490 mm |
Fuel Tank Capacity | 27 L | 45 L |