1957 Abarth 600 vs. 2012 Hyundai i20

To start off, 2012 Hyundai i20 is newer by 55 year(s). Which means there will be less support and parts availability for 1957 Abarth 600. In addition, the cost of maintenance, including insurance, on 1957 Abarth 600 would be higher. At 1,396 cc (4 cylinders), 2012 Hyundai i20 is equipped with a bigger engine. In terms of performance, 2012 Hyundai i20 (99 HP @ 5500 RPM) has 58 more horse power than 1957 Abarth 600. (41 HP @ 5500 RPM) In normal driving conditions, 2012 Hyundai i20 should accelerate faster than 1957 Abarth 600. With that said, vehicle weight also plays an important factor in acceleration. 2012 Hyundai i20 weights approximately 570 kg more than 1957 Abarth 600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1957 Abarth 600 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1957 Abarth 600. However, in wet, icy, snow, or gravel driving conditions, 2012 Hyundai i20, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Hyundai i20 (137 Nm @ 4200 RPM) has 83 more torque (in Nm) than 1957 Abarth 600. (54 Nm @ 4000 RPM). This means 2012 Hyundai i20 will have an easier job in driving up hills or pulling heavy equipment than 1957 Abarth 600. 2012 Hyundai i20 has automatic transmission and 1957 Abarth 600 has manual transmission. 1957 Abarth 600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Hyundai i20 will be easier to drive especially in heavy traffic.

Compare all specifications:

1957 Abarth 600 2012 Hyundai i20
Make Abarth Hyundai
Model 600 i20
Year Released 1957 2012
Engine Position Rear Front
Engine Size 747 cc 1396 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 41 HP 99 HP
Engine RPM 5500 RPM 5500 RPM
Torque 54 Nm 137 Nm
Torque RPM 4000 RPM 4200 RPM
Engine Bore Size 61 mm 77 mm
Engine Stroke Size 64 mm 75 mm
Engine Compression Ratio 9.0:1 17:01
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 585 kg 1155 kg
Vehicle Length 3300 mm 3940 mm
Vehicle Width 1390 mm 1710 mm
Vehicle Height 1410 mm 1490 mm
Wheelbase Size 2010 mm 2525 mm