1957 Alpine A 106 vs. 1953 Chevrolet Bel Air

To start off, 1957 Alpine A 106 is newer by 4 year(s). Which means there will be less support and parts availability for 1953 Chevrolet Bel Air. In addition, the cost of maintenance, including insurance, on 1953 Chevrolet Bel Air would be higher. At 3,859 cc (6 cylinders), 1953 Chevrolet Bel Air is equipped with a bigger engine. In terms of performance, 1953 Chevrolet Bel Air (115 HP @ 3700 RPM) has 66 more horse power than 1957 Alpine A 106. (49 HP @ 5000 RPM) In normal driving conditions, 1953 Chevrolet Bel Air should accelerate faster than 1957 Alpine A 106. With that said, vehicle weight also plays an important factor in acceleration. 1953 Chevrolet Bel Air weights approximately 928 kg more than 1957 Alpine A 106. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1953 Chevrolet Bel Air (271 Nm @ 2000 RPM) has 214 more torque (in Nm) than 1957 Alpine A 106. (57 Nm @ 1800 RPM). This means 1953 Chevrolet Bel Air will have an easier job in driving up hills or pulling heavy equipment than 1957 Alpine A 106. 1953 Chevrolet Bel Air has automatic transmission and 1957 Alpine A 106 has manual transmission. 1957 Alpine A 106 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1953 Chevrolet Bel Air will be easier to drive especially in heavy traffic.

Compare all specifications:

1957 Alpine A 106 1953 Chevrolet Bel Air
Make Alpine Chevrolet
Model A 106 Bel Air
Year Released 1957 1953
Engine Position Rear Front
Engine Size 845 cc 3859 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 49 HP 115 HP
Engine RPM 5000 RPM 3700 RPM
Torque 57 Nm 271 Nm
Torque RPM 1800 RPM 2000 RPM
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 555 kg 1483 kg
Vehicle Length 3710 mm 4980 mm
Vehicle Width 1460 mm 1910 mm
Vehicle Height 1180 mm 1650 mm
Wheelbase Size 2110 mm 2930 mm
Fuel Tank Capacity 28 L 60 L