1957 Alpine A 108 vs. 2005 Nissan Hardbody

To start off, 2005 Nissan Hardbody is newer by 48 year(s). Which means there will be less support and parts availability for 1957 Alpine A 108. In addition, the cost of maintenance, including insurance, on 1957 Alpine A 108 would be higher. At 2,389 cc (4 cylinders), 2005 Nissan Hardbody is equipped with a bigger engine. In terms of performance, 2005 Nissan Hardbody (138 HP) has 89 more horse power than 1957 Alpine A 108. (49 HP) In normal driving conditions, 2005 Nissan Hardbody should accelerate faster than 1957 Alpine A 108. With that said, vehicle weight also plays an important factor in acceleration. 2005 Nissan Hardbody weights approximately 1190 kg more than 1957 Alpine A 108. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2005 Nissan Hardbody is four wheel drive (4WD), it will have significant more traction and grip than 1957 Alpine A 108. In wet, icy, snow, or gravel driving conditions, 2005 Nissan Hardbody will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Nissan Hardbody (208 Nm @ 3600 RPM) has 140 more torque (in Nm) than 1957 Alpine A 108. (68 Nm @ 2000 RPM). This means 2005 Nissan Hardbody will have an easier job in driving up hills or pulling heavy equipment than 1957 Alpine A 108.

Compare all specifications:

1957 Alpine A 108 2005 Nissan Hardbody
Make Alpine Nissan
Model A 108 Hardbody
Year Released 1957 2005
Engine Position Rear Front
Engine Size 904 cc 2389 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 49 HP 138 HP
Torque 68 Nm 208 Nm
Torque RPM 2000 RPM 3600 RPM
Engine Compression Ratio 8.8:1 9.2:1
Drive Type Rear 4WD
Transmission Type Manual Manual
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 550 kg 1740 kg
Wheelbase Size 2110 mm 2830 mm