1957 Alpine A 108 vs. 2010 Dodge Ram
To start off, 2010 Dodge Ram is newer by 53 year(s). Which means there will be less support and parts availability for 1957 Alpine A 108. In addition, the cost of maintenance, including insurance, on 1957 Alpine A 108 would be higher. At 3,700 cc (6 cylinders), 2010 Dodge Ram is equipped with a bigger engine. In terms of performance, 2010 Dodge Ram (212 HP) has 163 more horse power than 1957 Alpine A 108. (49 HP) In normal driving conditions, 2010 Dodge Ram should accelerate faster than 1957 Alpine A 108.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Dodge Ram (235 Nm @ 4000 RPM) has 167 more torque (in Nm) than 1957 Alpine A 108. (68 Nm @ 2000 RPM). This means 2010 Dodge Ram will have an easier job in driving up hills or pulling heavy equipment than 1957 Alpine A 108.
Compare all specifications:
| 1957 Alpine A 108 | 2010 Dodge Ram | |
| Make | Alpine | Dodge |
| Model | A 108 | Ram |
| Year Released | 1957 | 2010 |
| Body Type | Coupe | Pickup |
| Engine Position | Rear | Front |
| Engine Size | 904 cc | 3700 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Horse Power | 49 HP | 212 HP |
| Torque | 68 Nm | 235 Nm |
| Torque RPM | 2000 RPM | 4000 RPM |
| Engine Bore Size | 60 mm | 88.1 mm |
| Engine Stroke Size | 80 mm | 100 mm |
| Engine Compression Ratio | 8.8:1 | 9.7:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Number of Seats | 2 seats | 3 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Length | 3700 mm | 5320 mm |
| Vehicle Width | 1450 mm | 2020 mm |
| Vehicle Height | 1280 mm | 1870 mm |
| Wheelbase Size | 2110 mm | 2900 mm |
