1957 Aston Martin DB2 vs. 2003 Cadillac Seville
To start off, 2003 Cadillac Seville is newer by 46 year(s). Which means there will be less support and parts availability for 1957 Aston Martin DB2. In addition, the cost of maintenance, including insurance, on 1957 Aston Martin DB2 would be higher. At 4,565 cc (8 cylinders), 2003 Cadillac Seville is equipped with a bigger engine. In terms of performance, 2003 Cadillac Seville (300 HP @ 6000 RPM) has 182 more horse power than 1957 Aston Martin DB2. (118 HP @ 5000 RPM) In normal driving conditions, 2003 Cadillac Seville should accelerate faster than 1957 Aston Martin DB2. With that said, vehicle weight also plays an important factor in acceleration. 2003 Cadillac Seville weights approximately 631 kg more than 1957 Aston Martin DB2. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1957 Aston Martin DB2 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1957 Aston Martin DB2. However, in wet, icy, snow, or gravel driving conditions, 2003 Cadillac Seville, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Cadillac Seville (407 Nm @ 4500 RPM) has 167 more torque (in Nm) than 1957 Aston Martin DB2. (240 Nm @ 3000 RPM). This means 2003 Cadillac Seville will have an easier job in driving up hills or pulling heavy equipment than 1957 Aston Martin DB2. 2003 Cadillac Seville has automatic transmission and 1957 Aston Martin DB2 has manual transmission. 1957 Aston Martin DB2 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Cadillac Seville will be easier to drive especially in heavy traffic.
Compare all specifications:
1957 Aston Martin DB2 | 2003 Cadillac Seville | |
Make | Aston Martin | Cadillac |
Model | DB2 | Seville |
Year Released | 1957 | 2003 |
Body Type | Coupe | Sedan |
Engine Position | Front | Front |
Engine Size | 2922 cc | 4565 cc |
Engine Cylinders | 6 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 118 HP | 300 HP |
Engine RPM | 5000 RPM | 6000 RPM |
Torque | 240 Nm | 407 Nm |
Torque RPM | 3000 RPM | 4500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1175 kg | 1806 kg |
Vehicle Length | 4310 mm | 5110 mm |
Vehicle Width | 1660 mm | 1910 mm |
Vehicle Height | 1370 mm | 1420 mm |
Wheelbase Size | 2520 mm | 2890 mm |
Fuel Tank Capacity | 86 L | 70 L |