1957 Austin A 35 vs. 1992 Chrysler ES
To start off, 1992 Chrysler ES is newer by 35 year(s). Which means there will be less support and parts availability for 1957 Austin A 35. In addition, the cost of maintenance, including insurance, on 1957 Austin A 35 would be higher. At 2,213 cc (4 cylinders), 1992 Chrysler ES is equipped with a bigger engine. In terms of performance, 1992 Chrysler ES (94 HP @ 4800 RPM) has 60 more horse power than 1957 Austin A 35. (34 HP @ 4750 RPM) In normal driving conditions, 1992 Chrysler ES should accelerate faster than 1957 Austin A 35. With that said, vehicle weight also plays an important factor in acceleration. 1992 Chrysler ES weights approximately 455 kg more than 1957 Austin A 35. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1992 Chrysler ES (166 Nm @ 3200 RPM) has 98 more torque (in Nm) than 1957 Austin A 35. (68 Nm @ 2000 RPM). This means 1992 Chrysler ES will have an easier job in driving up hills or pulling heavy equipment than 1957 Austin A 35.
Compare all specifications:
| 1957 Austin A 35 | 1992 Chrysler ES | |
| Make | Austin | Chrysler |
| Model | A 35 | ES |
| Year Released | 1957 | 1992 |
| Engine Position | Front | Front |
| Engine Size | 948 cc | 2213 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 34 HP | 94 HP |
| Engine RPM | 4750 RPM | 4800 RPM |
| Torque | 68 Nm | 166 Nm |
| Torque RPM | 2000 RPM | 3200 RPM |
| Engine Bore Size | 62.9 mm | 87.5 mm |
| Engine Stroke Size | 76.2 mm | 92 mm |
| Engine Compression Ratio | 8.3:1 | 8.1:1 |
| Fuel Type | Gasoline | Gasoline |
| Vehicle Weight | 690 kg | 1145 kg |
| Vehicle Length | 3470 mm | 4370 mm |
| Vehicle Width | 1410 mm | 1720 mm |
| Vehicle Height | 1490 mm | 1350 mm |
| Wheelbase Size | 2030 mm | 2470 mm |
