1957 Austin A 35 vs. 2008 Toyota Sequoia
To start off, 2008 Toyota Sequoia is newer by 51 year(s). Which means there will be less support and parts availability for 1957 Austin A 35. In addition, the cost of maintenance, including insurance, on 1957 Austin A 35 would be higher. At 5,663 cc (8 cylinders), 2008 Toyota Sequoia is equipped with a bigger engine. In terms of performance, 2008 Toyota Sequoia (382 HP @ 5600 RPM) has 348 more horse power than 1957 Austin A 35. (34 HP @ 4750 RPM) In normal driving conditions, 2008 Toyota Sequoia should accelerate faster than 1957 Austin A 35. With that said, vehicle weight also plays an important factor in acceleration. 2008 Toyota Sequoia weights approximately 640 kg more than 1957 Austin A 35. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 2008 Toyota Sequoia (544 Nm @ 3600 RPM) has 476 more torque (in Nm) than 1957 Austin A 35. (68 Nm @ 2000 RPM). This means 2008 Toyota Sequoia will have an easier job in driving up hills or pulling heavy equipment than 1957 Austin A 35.
Compare all specifications:
| 1957 Austin A 35 | 2008 Toyota Sequoia | |
| Make | Austin | Toyota |
| Model | A 35 | Sequoia |
| Year Released | 1957 | 2008 |
| Engine Position | Front | Front |
| Engine Size | 948 cc | 5663 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 34 HP | 382 HP |
| Engine RPM | 4750 RPM | 5600 RPM |
| Torque | 68 Nm | 544 Nm |
| Torque RPM | 2000 RPM | 3600 RPM |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 690 kg | 1330 kg |
| Vehicle Length | 3470 mm | 5220 mm |
| Vehicle Width | 1410 mm | 2040 mm |
| Vehicle Height | 1490 mm | 1920 mm |
| Wheelbase Size | 2030 mm | 3110 mm |
| Fuel Tank Capacity | 26 L | 100 L |
