1957 Austin A 55 vs. 1973 Fiat 132

To start off, 1973 Fiat 132 is newer by 16 year(s). Which means there will be less support and parts availability for 1957 Austin A 55. In addition, the cost of maintenance, including insurance, on 1957 Austin A 55 would be higher. At 1,754 cc (4 cylinders), 1973 Fiat 132 is equipped with a bigger engine. In terms of performance, 1973 Fiat 132 (111 HP @ 5600 RPM) has 60 more horse power than 1957 Austin A 55. (51 HP @ 4250 RPM) In normal driving conditions, 1973 Fiat 132 should accelerate faster than 1957 Austin A 55. With that said, vehicle weight also plays an important factor in acceleration. 1973 Fiat 132 weights approximately 40 kg more than 1957 Austin A 55. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1973 Fiat 132 (147 Nm @ 3400 RPM) has 37 more torque (in Nm) than 1957 Austin A 55. (110 Nm @ 2000 RPM). This means 1973 Fiat 132 will have an easier job in driving up hills or pulling heavy equipment than 1957 Austin A 55.

Compare all specifications:

1957 Austin A 55 1973 Fiat 132
Make Austin Fiat
Model A 55 132
Year Released 1957 1973
Engine Position Front Front
Engine Size 1489 cc 1754 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 51 HP 111 HP
Engine RPM 4250 RPM 5600 RPM
Torque 110 Nm 147 Nm
Torque RPM 2000 RPM 3400 RPM
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Vehicle Weight 1055 kg 1095 kg
Vehicle Length 4250 mm 4430 mm
Vehicle Width 1570 mm 1650 mm
Vehicle Height 1570 mm 1430 mm
Wheelbase Size 2530 mm 2560 mm