1957 Austin A 55 vs. 1996 Mercury Villager

To start off, 1996 Mercury Villager is newer by 39 year(s). Which means there will be less support and parts availability for 1957 Austin A 55. In addition, the cost of maintenance, including insurance, on 1957 Austin A 55 would be higher. At 2,960 cc (6 cylinders), 1996 Mercury Villager is equipped with a bigger engine. In terms of performance, 1996 Mercury Villager (149 HP @ 4800 RPM) has 98 more horse power than 1957 Austin A 55. (51 HP @ 4250 RPM) In normal driving conditions, 1996 Mercury Villager should accelerate faster than 1957 Austin A 55. With that said, vehicle weight also plays an important factor in acceleration. 1996 Mercury Villager weights approximately 745 kg more than 1957 Austin A 55. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1957 Austin A 55 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1957 Austin A 55. However, in wet, icy, snow, or gravel driving conditions, 1996 Mercury Villager, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.

Compare all specifications:

1957 Austin A 55 1996 Mercury Villager
Make Austin Mercury
Model A 55 Villager
Year Released 1957 1996
Engine Position Front Front
Engine Size 1489 cc 2960 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 2 valves
Horse Power 51 HP 149 HP
Engine RPM 4250 RPM 4800 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Vehicle Weight 1055 kg 1800 kg
Vehicle Length 4250 mm 4950 mm
Vehicle Width 1570 mm 1910 mm
Vehicle Height 1570 mm 1790 mm
Wheelbase Size 2530 mm 2860 mm