1957 Austin A 95 vs. 2008 Chrysler Aspen

To start off, 2008 Chrysler Aspen is newer by 51 year(s). Which means there will be less support and parts availability for 1957 Austin A 95. In addition, the cost of maintenance, including insurance, on 1957 Austin A 95 would be higher. At 4,701 cc (8 cylinders), 2008 Chrysler Aspen is equipped with a bigger engine. In terms of performance, 2008 Chrysler Aspen (303 HP @ 5650 RPM) has 212 more horse power than 1957 Austin A 95. (91 HP @ 4500 RPM) In normal driving conditions, 2008 Chrysler Aspen should accelerate faster than 1957 Austin A 95. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Aspen weights approximately 609 kg more than 1957 Austin A 95. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 Chrysler Aspen is four wheel drive (4WD), it will have significant more traction and grip than 1957 Austin A 95. In wet, icy, snow, or gravel driving conditions, 2008 Chrysler Aspen will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Aspen (447 Nm @ 3950 RPM) has 271 more torque (in Nm) than 1957 Austin A 95. (176 Nm @ 2000 RPM). This means 2008 Chrysler Aspen will have an easier job in driving up hills or pulling heavy equipment than 1957 Austin A 95. 2008 Chrysler Aspen has automatic transmission and 1957 Austin A 95 has manual transmission. 1957 Austin A 95 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Aspen will be easier to drive especially in heavy traffic.

Compare all specifications:

1957 Austin A 95 2008 Chrysler Aspen
Make Austin Chrysler
Model A 95 Aspen
Year Released 1957 2008
Engine Position Front Front
Engine Size 2639 cc 4701 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 2 valves
Horse Power 91 HP 303 HP
Engine RPM 4500 RPM 5650 RPM
Torque 176 Nm 447 Nm
Torque RPM 2000 RPM 3950 RPM
Engine Compression Ratio 8.3:1 9.8:1
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 5 seats 8 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1350 kg 1959 kg
Vehicle Length 4600 mm 5140 mm
Vehicle Width 1630 mm 1940 mm
Vehicle Height 1620 mm 1880 mm
Wheelbase Size 2690 mm 3030 mm
Fuel Tank Capacity 72 L 102 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]