1957 Austin A 95 vs. 2008 Chrysler Sebring
To start off, 2008 Chrysler Sebring is newer by 51 year(s). Which means there will be less support and parts availability for 1957 Austin A 95. In addition, the cost of maintenance, including insurance, on 1957 Austin A 95 would be higher. At 2,639 cc (6 cylinders), 1957 Austin A 95 is equipped with a bigger engine. In terms of performance, 2008 Chrysler Sebring (138 HP @ 4000 RPM) has 47 more horse power than 1957 Austin A 95. (91 HP @ 4500 RPM) In normal driving conditions, 2008 Chrysler Sebring should accelerate faster than 1957 Austin A 95. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Sebring weights approximately 500 kg more than 1957 Austin A 95. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1957 Austin A 95 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1957 Austin A 95. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Sebring (311 Nm @ 1800 RPM) has 135 more torque (in Nm) than 1957 Austin A 95. (176 Nm @ 2000 RPM). This means 2008 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1957 Austin A 95. 2008 Chrysler Sebring has automatic transmission and 1957 Austin A 95 has manual transmission. 1957 Austin A 95 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1957 Austin A 95 | 2008 Chrysler Sebring | |
| Make | Austin | Chrysler |
| Model | A 95 | Sebring |
| Year Released | 1957 | 2008 |
| Engine Position | Front | Front |
| Engine Size | 2639 cc | 1968 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 91 HP | 138 HP |
| Engine RPM | 4500 RPM | 4000 RPM |
| Torque | 176 Nm | 311 Nm |
| Torque RPM | 2000 RPM | 1800 RPM |
| Fuel Type | Gasoline | Diesel |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 4 seats |
| Number of Doors | 4 doors | 2 doors |
| Vehicle Weight | 1350 kg | 1850 kg |
| Vehicle Length | 4600 mm | 4940 mm |
| Vehicle Width | 1630 mm | 1850 mm |
| Vehicle Height | 1620 mm | 1490 mm |
| Wheelbase Size | 2690 mm | 2770 mm |
| Fuel Tank Capacity | 72 L | 64 L |
