1957 BMW 600 vs. 1952 Holden FX
To start off, 1957 BMW 600 is newer by 5 year(s). Which means there will be less support and parts availability for 1952 Holden FX. In addition, the cost of maintenance, including insurance, on 1952 Holden FX would be higher. At 2,166 cc (6 cylinders), 1952 Holden FX is equipped with a bigger engine. In terms of performance, 1952 Holden FX (51 HP) has 31 more horse power than 1957 BMW 600. (20 HP) In normal driving conditions, 1952 Holden FX should accelerate faster than 1957 BMW 600. With that said, vehicle weight also plays an important factor in acceleration. 1952 Holden FX weights approximately 420 kg more than 1957 BMW 600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1952 Holden FX (136 Nm @ 2000 RPM) has 98 more torque (in Nm) than 1957 BMW 600. (38 Nm @ 2800 RPM). This means 1952 Holden FX will have an easier job in driving up hills or pulling heavy equipment than 1957 BMW 600.
Compare all specifications:
1957 BMW 600 | 1952 Holden FX | |
Make | BMW | Holden |
Model | 600 | FX |
Year Released | 1957 | 1952 |
Engine Position | Rear | Front |
Engine Size | 583 cc | 2166 cc |
Engine Cylinders | 2 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 20 HP | 51 HP |
Torque | 38 Nm | 136 Nm |
Torque RPM | 2800 RPM | 2000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 550 kg | 970 kg |
Vehicle Length | 2910 mm | 4380 mm |
Vehicle Width | 1410 mm | 1710 mm |
Vehicle Height | 1380 mm | 1580 mm |
Wheelbase Size | 1710 mm | 2620 mm |