1957 BMW Isetta vs. 2008 Dodge Charger

To start off, 2008 Dodge Charger is newer by 51 year(s). Which means there will be less support and parts availability for 1957 BMW Isetta. In addition, the cost of maintenance, including insurance, on 1957 BMW Isetta would be higher. At 2,737 cc (6 cylinders), 2008 Dodge Charger is equipped with a bigger engine. In terms of performance, 2008 Dodge Charger (178 HP) has 165 more horse power than 1957 BMW Isetta. (13 HP) In normal driving conditions, 2008 Dodge Charger should accelerate faster than 1957 BMW Isetta. With that said, vehicle weight also plays an important factor in acceleration. 2008 Dodge Charger weights approximately 1325 kg more than 1957 BMW Isetta. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 Dodge Charger is four wheel drive (4WD), it will have significant more traction and grip than 1957 BMW Isetta. In wet, icy, snow, or gravel driving conditions, 2008 Dodge Charger will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. 2008 Dodge Charger has automatic transmission and 1957 BMW Isetta has manual transmission. 1957 BMW Isetta will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Dodge Charger will be easier to drive especially in heavy traffic.

Compare all specifications:

1957 BMW Isetta 2008 Dodge Charger
Make BMW Dodge
Model Isetta Charger
Year Released 1957 2008
Engine Position Rear Front
Engine Size 247 cc 2737 cc
Engine Cylinders 1 cylinders 6 cylinders
Engine Type single V
Horse Power 13 HP 178 HP
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 2 seats 5 seats
Number of Doors 1 doors 4 doors
Vehicle Weight 366 kg 1691 kg
Vehicle Length 2300 mm 5090 mm
Vehicle Width 1390 mm 1900 mm
Vehicle Height 1350 mm 1480 mm
Wheelbase Size 1510 mm 3050 mm