1957 DKW 3-6 Monza vs. 1968 Isuzu Florian
To start off, 1968 Isuzu Florian is newer by 11 year(s). Which means there will be less support and parts availability for 1957 DKW 3-6 Monza. In addition, the cost of maintenance, including insurance, on 1957 DKW 3-6 Monza would be higher. At 1,584 cc (4 cylinders), 1968 Isuzu Florian is equipped with a bigger engine. In terms of performance, 1968 Isuzu Florian (84 HP) has 35 more horse power than 1957 DKW 3-6 Monza. (49 HP) In normal driving conditions, 1968 Isuzu Florian should accelerate faster than 1957 DKW 3-6 Monza. With that said, vehicle weight also plays an important factor in acceleration. 1968 Isuzu Florian weights approximately 257 kg more than 1957 DKW 3-6 Monza. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1968 Isuzu Florian (123 Nm @ 2600 RPM) has 47 more torque (in Nm) than 1957 DKW 3-6 Monza. (76 Nm @ 2800 RPM). This means 1968 Isuzu Florian will have an easier job in driving up hills or pulling heavy equipment than 1957 DKW 3-6 Monza.
Compare all specifications:
| 1957 DKW 3-6 Monza | 1968 Isuzu Florian | |
| Make | DKW | Isuzu |
| Model | 3-6 Monza | Florian |
| Year Released | 1957 | 1968 |
| Engine Position | Rear | Front |
| Engine Size | 903 cc | 1584 cc |
| Engine Cylinders | 3 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 49 HP | 84 HP |
| Torque | 76 Nm | 123 Nm |
| Torque RPM | 2800 RPM | 2600 RPM |
| Engine Compression Ratio | 7.0:1 | 8.7:1 |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 733 kg | 990 kg |
| Vehicle Length | 4220 mm | 4020 mm |
| Vehicle Width | 1710 mm | 1500 mm |
| Vehicle Height | 1470 mm | 1330 mm |
| Wheelbase Size | 2360 mm | 2360 mm |
