1957 DKW 3-6 Monza vs. 1970 Ford Falcon
To start off, 1970 Ford Falcon is newer by 13 year(s). Which means there will be less support and parts availability for 1957 DKW 3-6 Monza. In addition, the cost of maintenance, including insurance, on 1957 DKW 3-6 Monza would be higher. At 5,763 cc (8 cylinders), 1970 Ford Falcon is equipped with a bigger engine. In terms of performance, 1970 Ford Falcon (247 HP) has 198 more horse power than 1957 DKW 3-6 Monza. (49 HP) In normal driving conditions, 1970 Ford Falcon should accelerate faster than 1957 DKW 3-6 Monza. With that said, vehicle weight also plays an important factor in acceleration. 1970 Ford Falcon weights approximately 731 kg more than 1957 DKW 3-6 Monza. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1970 Ford Falcon (482 Nm @ 2600 RPM) has 406 more torque (in Nm) than 1957 DKW 3-6 Monza. (76 Nm @ 2800 RPM). This means 1970 Ford Falcon will have an easier job in driving up hills or pulling heavy equipment than 1957 DKW 3-6 Monza.
Compare all specifications:
1957 DKW 3-6 Monza | 1970 Ford Falcon | |
Make | DKW | Ford |
Model | 3-6 Monza | Falcon |
Year Released | 1957 | 1970 |
Engine Position | Rear | Front |
Engine Size | 903 cc | 5763 cc |
Engine Cylinders | 3 cylinders | 8 cylinders |
Engine Type | in-line | in-line |
Horse Power | 49 HP | 247 HP |
Torque | 76 Nm | 482 Nm |
Torque RPM | 2800 RPM | 2600 RPM |
Drive Type | Rear | Rear |
Vehicle Weight | 733 kg | 1464 kg |
Vehicle Length | 4220 mm | 4690 mm |
Vehicle Width | 1710 mm | 1870 mm |
Vehicle Height | 1470 mm | 1430 mm |
Wheelbase Size | 2360 mm | 2830 mm |