1957 GAZ M-20 vs. 1948 Tatra Tatraplan
To start off, 1957 GAZ M-20 is newer by 9 year(s). Which means there will be less support and parts availability for 1948 Tatra Tatraplan. In addition, the cost of maintenance, including insurance, on 1948 Tatra Tatraplan would be higher. At 2,120 cc (4 cylinders), 1957 GAZ M-20 is equipped with a bigger engine. In terms of performance, both vehicles can yield 51 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1957 GAZ M-20 weights approximately 284 kg more than 1948 Tatra Tatraplan.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1957 GAZ M-20 (125 Nm @ 2200 RPM) has 7 more torque (in Nm) than 1948 Tatra Tatraplan. (118 Nm @ 2000 RPM). This means 1957 GAZ M-20 will have an easier job in driving up hills or pulling heavy equipment than 1948 Tatra Tatraplan.
Compare all specifications:
1957 GAZ M-20 | 1948 Tatra Tatraplan | |
Make | GAZ | Tatra |
Model | M-20 | Tatraplan |
Year Released | 1957 | 1948 |
Engine Size | 2120 cc | 1952 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 51 HP | 51 HP |
Engine RPM | 3600 RPM | 4000 RPM |
Torque | 125 Nm | 118 Nm |
Torque RPM | 2200 RPM | 2000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Vehicle Weight | 1460 kg | 1176 kg |
Vehicle Length | 4670 mm | 4550 mm |
Vehicle Width | 1900 mm | 1680 mm |
Vehicle Height | 1650 mm | 1530 mm |
Wheelbase Size | 2710 mm | 2710 mm |