1957 GAZ M-20 vs. 1953 Holden FX
To start off, 1957 GAZ M-20 is newer by 4 year(s). Which means there will be less support and parts availability for 1953 Holden FX. In addition, the cost of maintenance, including insurance, on 1953 Holden FX would be higher. At 2,166 cc (6 cylinders), 1953 Holden FX is equipped with a bigger engine. In terms of performance, both vehicles can yield 51 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1957 GAZ M-20 weights approximately 490 kg more than 1953 Holden FX.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1953 Holden FX (136 Nm @ 2000 RPM) has 11 more torque (in Nm) than 1957 GAZ M-20. (125 Nm @ 2200 RPM). This means 1953 Holden FX will have an easier job in driving up hills or pulling heavy equipment than 1957 GAZ M-20.
Compare all specifications:
1957 GAZ M-20 | 1953 Holden FX | |
Make | GAZ | Holden |
Model | M-20 | FX |
Year Released | 1957 | 1953 |
Engine Size | 2120 cc | 2166 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 51 HP | 51 HP |
Torque | 125 Nm | 136 Nm |
Torque RPM | 2200 RPM | 2000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1460 kg | 970 kg |
Vehicle Length | 4670 mm | 4380 mm |
Vehicle Width | 1900 mm | 1710 mm |
Vehicle Height | 1650 mm | 1580 mm |
Wheelbase Size | 2710 mm | 2620 mm |