1957 Holden FE vs. 2010 Chrysler Town & Country
To start off, 2010 Chrysler Town & Country is newer by 53 year(s). Which means there will be less support and parts availability for 1957 Holden FE. In addition, the cost of maintenance, including insurance, on 1957 Holden FE would be higher. At 3,300 cc (6 cylinders), 2010 Chrysler Town & Country is equipped with a bigger engine. In terms of performance, 2010 Chrysler Town & Country (175 HP @ 5000 RPM) has 115 more horse power than 1957 Holden FE. (60 HP @ 4000 RPM) In normal driving conditions, 2010 Chrysler Town & Country should accelerate faster than 1957 Holden FE. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Town & Country weights approximately 986 kg more than 1957 Holden FE. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1957 Holden FE is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1957 Holden FE. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Town & Country, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler Town & Country (278 Nm @ 4000 RPM) has 128 more torque (in Nm) than 1957 Holden FE. (150 Nm @ 1200 RPM). This means 2010 Chrysler Town & Country will have an easier job in driving up hills or pulling heavy equipment than 1957 Holden FE. 2010 Chrysler Town & Country has automatic transmission and 1957 Holden FE has manual transmission. 1957 Holden FE will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Town & Country will be easier to drive especially in heavy traffic.
Compare all specifications:
1957 Holden FE | 2010 Chrysler Town & Country | |
Make | Holden | Chrysler |
Model | FE | Town & Country |
Year Released | 1957 | 2010 |
Body Type | Sedan | Minivan |
Engine Position | Front | Front |
Engine Size | 2166 cc | 3300 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 60 HP | 175 HP |
Engine RPM | 4000 RPM | 5000 RPM |
Torque | 150 Nm | 278 Nm |
Torque RPM | 1200 RPM | 4000 RPM |
Fuel Type | Gasoline | Flex Fuel |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 7 seats |
Number of Doors | 4 doors | 5 doors |
Vehicle Weight | 980 kg | 1966 kg |
Vehicle Length | 4480 mm | 5144 mm |
Vehicle Width | 1710 mm | 1953 mm |
Vehicle Height | 1560 mm | 1750 mm |
Wheelbase Size | 2670 mm | 3078 mm |