1957 Lancia Appia vs. 2008 Mercedes-Benz ML

To start off, 2008 Mercedes-Benz ML is newer by 51 year(s). Which means there will be less support and parts availability for 1957 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1957 Lancia Appia would be higher. At 4,966 cc (8 cylinders), 2008 Mercedes-Benz ML is equipped with a bigger engine. In terms of performance, 2008 Mercedes-Benz ML (288 HP @ 2700 RPM) has 236 more horse power than 1957 Lancia Appia. (52 HP @ 5000 RPM) In normal driving conditions, 2008 Mercedes-Benz ML should accelerate faster than 1957 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mercedes-Benz ML weights approximately 1300 kg more than 1957 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 Mercedes-Benz ML is four wheel drive (4WD), it will have significant more traction and grip than 1957 Lancia Appia. In wet, icy, snow, or gravel driving conditions, 2008 Mercedes-Benz ML will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mercedes-Benz ML (440 Nm @ 2700 RPM) has 353 more torque (in Nm) than 1957 Lancia Appia. (87 Nm @ 3500 RPM). This means 2008 Mercedes-Benz ML will have an easier job in driving up hills or pulling heavy equipment than 1957 Lancia Appia. 2008 Mercedes-Benz ML has automatic transmission and 1957 Lancia Appia has manual transmission. 1957 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Mercedes-Benz ML will be easier to drive especially in heavy traffic.

Compare all specifications:

1957 Lancia Appia 2008 Mercedes-Benz ML
Make Lancia Mercedes-Benz
Model Appia ML
Year Released 1957 2008
Engine Position Front Front
Engine Size 1091 cc 4966 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type V V
Valves per Cylinder 2 valves 3 valves
Horse Power 52 HP 288 HP
Engine RPM 5000 RPM 2700 RPM
Torque 87 Nm 440 Nm
Torque RPM 3500 RPM 2700 RPM
Engine Bore Size 68 mm 97 mm
Engine Stroke Size 75 mm 84 mm
Engine Compression Ratio 8.0:1 10.0:1
Top Speed 150 km/hour 222 km/hour
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 4 seats 7 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 840 kg 2140 kg
Vehicle Length 3990 mm 4640 mm
Vehicle Width 1440 mm 1850 mm
Vehicle Height 1240 mm 1830 mm
Wheelbase Size 2520 mm 2830 mm