1957 Mercedes-Benz 220 vs. 1996 Nissan Stagea

To start off, 1996 Nissan Stagea is newer by 39 year(s). Which means there will be less support and parts availability for 1957 Mercedes-Benz 220. In addition, the cost of maintenance, including insurance, on 1957 Mercedes-Benz 220 would be higher. At 2,499 cc (6 cylinders), 1996 Nissan Stagea is equipped with a bigger engine. In terms of performance, 1996 Nissan Stagea (187 HP @ 6400 RPM) has 83 more horse power than 1957 Mercedes-Benz 220. (104 HP @ 5200 RPM) In normal driving conditions, 1996 Nissan Stagea should accelerate faster than 1957 Mercedes-Benz 220. With that said, vehicle weight also plays an important factor in acceleration. 1996 Nissan Stagea weights approximately 241 kg more than 1957 Mercedes-Benz 220. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Nissan Stagea (234 Nm @ 4800 RPM) has 56 more torque (in Nm) than 1957 Mercedes-Benz 220. (178 Nm @ 3500 RPM). This means 1996 Nissan Stagea will have an easier job in driving up hills or pulling heavy equipment than 1957 Mercedes-Benz 220. 1996 Nissan Stagea has automatic transmission and 1957 Mercedes-Benz 220 has manual transmission. 1957 Mercedes-Benz 220 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1996 Nissan Stagea will be easier to drive especially in heavy traffic.

Compare all specifications:

1957 Mercedes-Benz 220 1996 Nissan Stagea
Make Mercedes-Benz Nissan
Model 220 Stagea
Year Released 1957 1996
Engine Position Front Front
Engine Size 2195 cc 2499 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 104 HP 187 HP
Engine RPM 5200 RPM 6400 RPM
Torque 178 Nm 234 Nm
Torque RPM 3500 RPM 4800 RPM
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 1385 kg 1626 kg
Vehicle Length 4710 mm 4810 mm
Vehicle Width 1800 mm 1760 mm
Vehicle Height 1540 mm 1500 mm
Wheelbase Size 2710 mm 2730 mm