1957 Mercedes-Benz 300 vs. 2010 Daihatsu Terios
To start off, 2010 Daihatsu Terios is newer by 53 year(s). Which means there will be less support and parts availability for 1957 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1957 Mercedes-Benz 300 would be higher. At 2,994 cc (6 cylinders), 1957 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 1957 Mercedes-Benz 300 (215 HP @ 5800 RPM) has 111 more horse power than 2010 Daihatsu Terios. (104 HP @ 6000 RPM). In normal driving conditions, 1957 Mercedes-Benz 300 should accelerate faster than 2010 Daihatsu Terios. With that said, vehicle weight also plays an important factor in acceleration. 1957 Mercedes-Benz 300 weights approximately 620 kg more than 2010 Daihatsu Terios. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 Daihatsu Terios is four wheel drive (4WD), it will have significant more traction and grip than 1957 Mercedes-Benz 300. In wet, icy, snow, or gravel driving conditions, 2010 Daihatsu Terios will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1957 Mercedes-Benz 300 (275 Nm @ 4600 RPM) has 135 more torque (in Nm) than 2010 Daihatsu Terios. (140 Nm @ 4400 RPM). This means 1957 Mercedes-Benz 300 will have an easier job in driving up hills or pulling heavy equipment than 2010 Daihatsu Terios. 2010 Daihatsu Terios has automatic transmission and 1957 Mercedes-Benz 300 has manual transmission. 1957 Mercedes-Benz 300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Daihatsu Terios will be easier to drive especially in heavy traffic.
Compare all specifications:
1957 Mercedes-Benz 300 | 2010 Daihatsu Terios | |
Make | Mercedes-Benz | Daihatsu |
Model | 300 | Terios |
Year Released | 1957 | 2010 |
Engine Position | Front | Front |
Engine Size | 2994 cc | 1495 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 215 HP | 104 HP |
Engine RPM | 5800 RPM | 6000 RPM |
Torque | 275 Nm | 140 Nm |
Torque RPM | 4600 RPM | 4400 RPM |
Engine Bore Size | 85 mm | 72.1 mm |
Engine Stroke Size | 88 mm | 91.8 mm |
Engine Compression Ratio | 8.6:1 | 10.0:1 |
Acceleration 0-100mph | 10 seconds | 13.6 seconds |
Drive Type | Rear | 4WD |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1385 kg | 765 kg |
Vehicle Length | 4580 mm | 4060 mm |
Vehicle Width | 1800 mm | 1750 mm |
Vehicle Height | 1310 mm | 1700 mm |
Wheelbase Size | 2410 mm | 2590 mm |
Fuel Tank Capacity | 100 L | 50 L |