1957 Morris Oxford vs. 2012 SsangYong Kyron

To start off, 2012 SsangYong Kyron is newer by 55 year(s). Which means there will be less support and parts availability for 1957 Morris Oxford. In addition, the cost of maintenance, including insurance, on 1957 Morris Oxford would be higher. At 1,996 cc (4 cylinders), 2012 SsangYong Kyron is equipped with a bigger engine. In terms of performance, 2012 SsangYong Kyron (139 HP @ 4000 RPM) has 90 more horse power than 1957 Morris Oxford. (49 HP @ 4200 RPM) In normal driving conditions, 2012 SsangYong Kyron should accelerate faster than 1957 Morris Oxford. With that said, vehicle weight also plays an important factor in acceleration. 2012 SsangYong Kyron weights approximately 838 kg more than 1957 Morris Oxford. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2012 SsangYong Kyron is four wheel drive (4WD), it will have significant more traction and grip than 1957 Morris Oxford. In wet, icy, snow, or gravel driving conditions, 2012 SsangYong Kyron will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 SsangYong Kyron (310 Nm @ 1800 RPM) has 204 more torque (in Nm) than 1957 Morris Oxford. (106 Nm @ 2400 RPM). This means 2012 SsangYong Kyron will have an easier job in driving up hills or pulling heavy equipment than 1957 Morris Oxford. 2012 SsangYong Kyron has automatic transmission and 1957 Morris Oxford has manual transmission. 1957 Morris Oxford will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 SsangYong Kyron will be easier to drive especially in heavy traffic.

Compare all specifications:

1957 Morris Oxford 2012 SsangYong Kyron
Make Morris SsangYong
Model Oxford Kyron
Year Released 1957 2012
Body Type Sedan SUV
Engine Position Front Front
Engine Size 1489 cc 1996 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 49 HP 139 HP
Engine RPM 4200 RPM 4000 RPM
Torque 106 Nm 310 Nm
Torque RPM 2400 RPM 1800 RPM
Fuel Type Gasoline Diesel
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Vehicle Weight 1085 kg 1923 kg
Vehicle Length 4320 mm 4670 mm
Vehicle Width 1660 mm 1750 mm
Vehicle Height 1610 mm 1890 mm
Wheelbase Size 2470 mm 2750 mm